For sealing of insulated or non-insulated flammable pipes and multi-layer pipes
Features & Benefits
Built-up fire collar for plastic (combustible) pipes and pipe systems. For apertures in walls (solid walls or light partition walls) and ceilings with fire protection in accordance with UK Legislation
The installation of elbows, pipe couplings or branch pipes into the wall or directly in, or under the ceiling is possible due to the superficial height of the sleeve
Angular insertion is possible
Installation of telecommunications pipeline- or protective piping with up to 2 cables is possible
Suitable for damp conditions
Should be fitted to both sides of a wall and on one side below a ceiling flexible annular gap seal
The use of PE noise insulation hose up to a thickness of 4 mm of composite natural rubber insulation to a thickness of 43 mm is allowed
Offset installation of sleeve is permitted
Build in is possible without additional fixings (by simply bending and sliding the fixing tabs)
Zero distance is possible between fire collars
In approval with the German Institute for civil engineering (DIBt) in accordance with Z 19.17-1194 and monitored by the MPA Braunschweig, Germany European approval: ETA-13/0906