• Lindapter M20 Type LR Girder Clamp Zinc Plated
  • LR20 1
  • LR20 2
  • LR20 3

Lindapter M20 Type LR Girder Clamp

Lindapter
  • Brand: Lindapter
From £1,741.00 ex. VAT per 100From £2,089.20 inc. VAT per 100

Description

Self-adjusting girder clamp used to quickly connect steel beams with flat or tapered flanges and resist moderate tensile loading.

Overview

The Type LR girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections where moderate load capacities are present. It consists of two parts, the clip and the saddle, which allow the clamp to self-adjust to suit flange thicknesses between 3mm and 24mm. Suitable for use on parallel and tapered flanges up to 15°. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection.

Features & Benefits

  • Clamping ranges from 3mm - 24mm (size M24).
  • For parallel and tapered flanges up to 15°.
  • The leg of the saddle prevents the clamp from rotating.
  • The tail spans slotted clearance holes.

Approvals

  • CE Marked
  • Lloyd’s Register Approved
  • TÜV Nord Approved
  • Manufactured to ISO9001 and ISO14001

Packing Pieces

Packing pieces are available to increase the clamping range. Download datasheet below for further information.

Location & End Plates

These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps. Download datasheet below for further information.

Properties

  • Manufactured from malleable iron to BS EN 1562.
  • Available with zinc plated or hot dip galvanised finish.
  • Reaction to fire: A1 (Steel)
  • Durability and corrosion protection:
Corrosivity Class Galvanised Steel Electroplated Steel
C1 More than 50 years More than 20 years
C2 More than 50 years More than 5 years
C3 More than 20 years Not Suitable

Product Options

Part CodeNameStockPrice (per 100)QtyBolt 8.8 ZTensile / 1 Bolt (kN)Slip / 2 Bolts (kN)Tightening Torque (Nm)Clamping Range V (mm)Y (mm)X (mm)T (mm)Width with Saddle (mm);Finish
LR20Lindapter M20 Type LR Girder Clamp Zinc Plated

Live Stock Unavailable

In Stock

Available to Order

£1741.00 ex. VAT £2089.20 inc. VAT

M2014.732853 - 2042 - 4946 - 5141 - 4857
LR20HDGLindapter M20 Type LR Girder Clamp Hot Dip Galvanised

Live Stock Unavailable

In Stock

Available to Order

£2264.00 ex. VAT £2716.80 inc. VAT

M2014.732853 - 2042 - 4946 - 5141 - 4857
Sorry, this item is currently out of stock.
We currently hold [remaining-stock] units of this item in stock. The remainder will be put on back order.
You cannot order more of this item than we currently hold in stock.
You must order at least [min-order-qty] of this product.
You must order at least [min-order-qty] of this product. We currently hold [remaining-stock] in stock. The remainder will be put on back order.

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK